This range of trailers goes up to 10 tonnes and an unloading elevation of up to 3 metres.  For greater tonnage or height ask us about adapting the trailer to your needs.

Outstanding for a wide range of differences:

Reinforced structure. An ideal, modern design, an improvement on everything which has gone beforeand top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also achieve maximum width to give better stability when tipping.

The watertight monoblock boxes are rounded with folds and upper cold-formed steel structural tube coping (to quality standard S-275-JOH) to give extra strength.

The tipping angle is always greater than 45 degrees. Since there are materials which require it, the rear rotation of the tipping mechanism is designed to achieve great stability when tipping and a greater height when unloading the product carried.


Each and every one of the components used is highly resistant and of top quality, whether axles, wheels, suspension, telescopic cylinder, etc. To exclude possible breakdowns in use, overloads, heavy work, etc.

Its solidity, aesthetic appearance and excellent finish mark the difference.

3 year warranty.



  1. Reinforced chassismade of structural steel tube quality S-275-J0H with intermediate crossbars.
  2. Double chassis (depending on model)
  3. Rear turning of the tipper designed to achieve great stability when tipping and a higher unloading height for the product transported.
  4. Single-hull box, Dumper; ROUNDED with lateral strengthening folds
  1. Box with structural tube top finish (or lateral breakwaters when it is for the harvest or liquids) (depending on models)
  1. Watertight automatic-opening gate with rubber seal
  2. 2 or 4 automatic closing claws and 3 or 5 butterfly nut safety locks.
  3. Hydraulic brake on both axles (one piston per wheel) with possibility of adapting for tractor brake pedal
  4. Mechanical hand brake.
  5. Industrial leaf-sprung tandem
  6. Telescopic, anti-seizure tipping piston (over sized to prevent overload).
  7. Hose and cable from the point of the lance to prevent getting tangled when the tractor turns.
  1.     Hooks for chains
  2.     Primer and finishing coat composed of two components of maximum adherence and wear
  3.     3 year warranty
  1. Reinforced lance.
  2. Mechanical support withscaler
  3. Front ladder.
  4. Pivots for tying in the whole perimeter.
  5. 30 litre water tank.
  6. Tool box.


To make your customised trailer and other accessories, contact us





  1.        Traction system
  2.        With a wide range of tyres for different purposes.
  3.        Lowered chassis
  4.        Twinned wheels
  5.        Hydraulic rotation in the lance
  6.        Speed axles
  7.        Self-Steering Axle
  8.        Forced Self-Steering Axle
  9.        Curved shafts
  10.     Rear supports
  11.     Front balcony (included with the side awning)
  12.     Rear supports
  13.     3-position, multipurpose hydraulic gate
  14.     Retaining hydraulic gate
  15.     Side gate
  16.     Cereal hatch
  17.     Worm
  18.     Different types of awning
  19.     On drop sides
  20.     Side windows
  21.     Different types of suspension on the lance (hydraulic, pneumatic)
  22.     Hydraulic or pneumatic suspension on axles
  23.     Pneumatic or mixed brakes
  24.     Adaptation for harvest (front, rear and side surge breaks. Rear apron. Double floor, outlet for liquids, retaining hatch)
  25.     Hydraulic dumb waiter
  26.     Rear controls for opening hydraulic tailgate
  27.     Auxiliary motor-pump- tank group
  28.     Damask polishing



To make your customised trailer and other accessories, contact us

HF Trailers · Camino de la Calleja S/N 26191 Sorzano (La Rioja) Spain