REMOLQUE 2E

THREE AXLE DUMP TRAILERS SEPARADED WITH SWIVEL PLATE WITH PULL-DOWN SIDES (REMOVABLE DROPSIDES)

Highly suitable for wide turns and for on-roal driving.

Manufactured with detachable box and square in shape. This is a versatile trailer since it can be converted into a flatbed for carrying machinery or vehicles, or for bales, pallets, etc.  It is a utility tractor since it can be used for different purposes and activities, such as animal husbandry, smallholdings, vine growing, etc.

Outstanding for a wide range of differences:

Reinforced structure. An ideal, modern design, an improvement on everything which has gone beforeand top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also achieve maximum width to give better stability when tipping. Incorporating intermediate spars on the front vane of the chassis. Strengthened monoblock forward traction unit, as this is the part which undergoes most strain when pulling.

The tipping angle is always greater than 45 degrees. Since there are materials which require it, the rear rotation of the tipping mechanism is designed to achieve great stability when tipping and a greater height when unloading the product carried.

 

We achieve the maximum stability. Studying how to lower the box as close to the ground as possible.

We also offer the possibility of mounting a lowered chassis so as to lower the height of the box as much as possible.

Each and every one of the components used is highly resistant and of top quality, whether axles, wheels, suspension, telescopic cylinder, etc. To exclude possible breakdowns in use, overloads, heavy work, etc.8

Its solidity, aesthetic appearance and excellent finish mark the difference.

3 year warranty.

EQUIPMENT INCLUDED

  1. Reinforced chassis made of structural steel tube quality S-275-J0H with intermediate crossbars.
  2. Double chassis (depending on model)
  1.        Strengthened front traction
  2.        Industrial ball impeller (16, 20 and 22 mm diameter depending on model)
  3.     Spring for adjusting height of the thrower with tensioner
  4.     Pivots for tying in the whole perimeter.
  5.     30 litre water tank.
  6.     Tool box.
  7.     Primer and finishing coat composed of two components of maximum adherence and wear
  8.     3 year warranty
  1. Rear turning of the tipper designed to achieve great stability when tipping and a higher unloading height for the product transported.
  2. Box with detachable sides and removable tailgate
  3. Telescopic, anti-seizure tipping piston (over sized to prevent overload).
    1. Tipping angle 47 to 49º
  4. Oscillating bumper and protective grille for pilot lamps (electrical installation according to regulations)
  1. Telescopic, anti-seizure tipping piston (over sized to prevent overload).
    1. Tipping angle 47 to 49º
  2. Oscillating bumper and protective grille for pilot lamps (electrical installation according to regulations)
  3. Hose and cable from the point of the lance to prevent getting tangled when the tractor turns.
  4. Hooks for chains
  5. Reinforced lance with multi-leaf sprung suspension.
  1. Leaf-sprung.

 

To make your customised trailer and other accessories, contact us

                                          

OPTIONAL EQUIPMENT                                  

  1.        Regulador de altura de lanza con ajuste automático (sustituyendo al muelle tensor)
  2.        Lowered chassis
  3.        With a wide range of tyres for different purposes
  4.        Twinned wheels
  5.        Speed axles
  6.        Curved shafts
  7.        Rear supports
  8.        Cereal hatch
  9.     Worm
  10.     Different types of awning
  11.     On drop sides
  12.     Side windows
  13.     Pneumatic or mixed brakes
  14.     Auxiliary motor-pump-tank group

 

To make your customised trailer and other accessories, contact us

MODELO

MEDIDAS INTERIORES DE CAJA

CAPACIDAD (m3/trigo)

RUEDA

HF-2E-6TS

3500x1900

3,6 / 2.900

6,3 / 5.000

8,3 / 6.600

10.0/75-15.3’’

HF-2E-10T40

4000x2000

4,4 / 3.500

7,6 / 6.000

10 / 8.000

11.5/80-15.3’’

HF-2E-13T41

4100x2100

6 / 4.800

9,5 / 7.600

12 / 9.600

285/70R19.5’’

HF-2E-13T43

4250x2100

6,2 / 5.000

9,8 / 7.800

12,5 / 10.000

285/70R19.5’’

HF-2E-14T45

4500x2200

7 / 5.600

12,9 / 10.300

15.8 / 12.600

285/70R19.5’’

HF-2E-14T47

4750x2200

7,3 / 5.800

13,5 / 10.800

16,7 / 13.300

285/70R19.5’’

HF-2E-16T47

4750x2450

8,1 / 6.500

16,3 / 13.000

19,8 / 15.800

385/65R22.5’’

HF-2E-16T50

5000x2450

8,5 / 6.800

17,1 / 13.700

20,8 / 16.600

385/65R22.5’’

HF-2E-18T55

5500x2450

9,4 / 7.500

18,8 / 15.000

22,9 / 18.300

385/65R22.5’’

HF-2E-18T60

5500x2450

9,4 / 7.500

18,8 / 15.000

22,9 / 18.300

385/65R22.5’’

HF-2E-18T65

6000x2450

10,3 / 8.200

20,6 / 16.400

25 / 20.000

385/65R22.5’’

HF-2E-18T70

6500x2450

11,1 / 8.800

22,3 / 17.800

27 / 21.600

445/65R22.5’’

HF-2E-6TS

7000x2450

12 / 9.600

24 / 19.200

29,1 / 23.300

445/65R22.5’’

For other models, to make a customised trailer or other accessories, please contact us.

HF Trailers · Camino de la Calleja S/N 26191 Sorzano (La Rioja) Spain