BAÑERAS TÁNDEM

DUAL AXLE TANDEM DUMP TRAILERS

Highly recommended for mountainous terrain or where there are varying slopes, with a safer tractor for difficult situations. Easy handling when making manoeuvres.

Various types of box:

Dumper Box: Watertight Monoblock, semicircular in shape with slight rounding and lateral folds to add robust strength. These dumpsters are for all kinds of loads  but are recommended for transporting manure, as it is virtually impossible for the manure to stick to the floor of the box when tipped up. The design of this kind of trailer is unique, in order to provide elegance and maximum performance. 

 

Costillas box:Watertight, square monoblock box with lateral reinforcement.

Outstanding for a wide range of differences: 

Reinforced structure. An ideal, modern design, an improvement on everything which has gone beforeand top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also achieve maximum width to give better stability when tipping.

The watertight monoblock boxes are rounded with folds and upper cold-formed steel structural tube coping (to quality standard S-275-JOH) to give extra strength.

The tipping angle is always greater than 45 degrees. Since there are materials which require it, the rear rotation of the tipping mechanism is designed to achieve great stability when tipping and a greater height when unloading the product carried.

We achieve the maximum stability. Studying how to lower the box as close to the ground as possible.

Each and every one of the components used is highly resistant and of top quality, whether axles, wheels, suspension, telescopic cylinder, etc. To exclude possible breakdowns in use, overloads, heavy work, etc.

Its solidity, aesthetic appearance and excellent finish mark the difference.

3 year warranty.

 

EQUIPAMENT INCLUIDED

 

  1. Reinforced chassismade of structural steel tube quality S-275-J0H with intermediate crossbars.
  2. Double chassis (depending on model)
  3. Rear turning of the tipper designed to achieve great stability when tipping and a higher unloading height for the product transported.
  1.        Single-hull box in different models:
  2.         Eco; SQUARE with lateral strengthening folds
  3.        Box with structural tube top finish (or lateral breakwaters when it is for the harvest or liquids) (depending on models)
  4.     Hooks for chains
  5.     Primer and finishing coat composed of two components of maximum adherence and wear
  6.     3 year warranty
    1. Costillas; SQUARE, with side reinforcement
    2. Dumper; ROUNDED with lateral strengthening folds
  1. Watertight automatic-opening gate with rubber seal
  2. 2 or 4 automatic closing claws and 3 or 5 butterfly nut safety locks.
  3. Hydraulic brake on both axles (one piston per wheel) with possibility of adapting for tractor brake pedal
  4. Mechanical hand brake.
  5. Industrial leaf-sprung tandem
  6. Telescopic, anti-seizure tipping piston (over sized to prevent overload).
    1. Tipping angle 47 to 49º
  7. Oscillating bumper and protective grille for pilot lamps (electrical installation according to regulations)
  8. Hose and cable from the point of the lance to prevent getting tangled when the tractor turns.
  1. Reinforced lance with multi-leaf sprung suspension.
  2. Mechanical support withscaler (hydraulic dumbwaiterwith manual pump from HF-TA-18T55)
  3. Front ladder.
  4. Pivots for tying in the whole perimeter.
  5. 30 litre water tank.
  6. Tool box.
  7. Sheet metal mudguards

 

To make your customised trailer and other accessories, contact us

 

OPTIONAL EQUIPMENT

                                   

  1.        Traction system
  2.        With a wide range of tyres for different purposes.
  3.        Stainless steel box
  4.        Lowered chassis
  5.        Twinned wheels
  6.        Hydraulic rotation in the lance
  7.        Speed axles
  8.        Self-Steering Axle
  9.        Forced Self-Steering Axle
  10.     Curved shafts
  11.     Rear supports
  12.     Front balcony (included with the side awning)
  13.     Rear supports
  14.     3-position, multipurpose hydraulic gate
  15.     Retaining hydraulic gate
  16.     Side gate
  17.     Cereal hatch
  18.     Worm
  19.     Different types of awning
  20.     On drop sides
  21.     Side windows
  22.     Different types of suspension on the lance (hydraulic, pneumatic)
  23.     Hydraulic or pneumatic suspension on axles
  24.     Pneumatic or mixed brakes
  25.     Adaptation for harvest (front, rear and side surge breaks. Rear apron. Double floor, outlet for liquids, retaining hatch)
  26.     Hydraulic dumb waiter
  27.     Rear controls for opening hydraulic tailgate
  28.     Auxiliary motor-pump- tank group
  29.     Food-safe paint (epoxy)

 

To make your customised trailer and other accessories, contact us

MODEL

LENGTH INSIDE OF BOX

CAPACITY

(m3/Grape/Wheat)

WHEEL

HF-1ET-6TS

3500X1900X 950

6,5/ 6000 / 5.200

10.0/75-15.3

HF-1ET-8TS

3800X2000X1130

8,5/ 7.700 / 7.000

11.5/80-15.3’’

HF-1ET-10T38

3800X2000X1240

9,5/ 8.600 / 7.600

11.5/80-15.3’’

HF-1ET-10T40

4000X2000X1240

10 / 9.000 / 8.000

11.5/80-15.3’’

HF-TA-13T43

4250X2100X1300

11,5/ 10.500 / 9.200

285/70R19.5’’

HF-TA-14T45

4500X2200X1350

13,3/ 12.000 / 10.700

285/70R19.5’’

HF-TA-14T47

4750X2200X1450

15,1/ 13.600 / 12.100

285/70R19.5’’

HF-TA-16T47

4750x2300x1500

16,3/ 14.7000 / 13.100

385/65R22.5’’ R

HF-TA-16T50

5000x2300x1500

17,2/ 15.500 / 13.800

385/65R22.5’’ R

HF-TA-18T55

5500x2300x1600

20,2/ 18.200 / 16.200

385/65R22.5’’ R

HF-TA-18T60

6000x2300x1600

22 / 19.800 / 17.600

385/65R22.5’’ R

HF-TA-18T65

6500x2300x1600

23,9/ 21.500 / 19.500

445/65R22.5’’ N

HF-TA-18T70

7000x2300x1600

25,7/ 23.200 / 21.000

445/65R22.5’’ N

For other models, to make a customised trailer or other accessories, please contact us.

HF Trailers · Camino de la Calleja S/N 26191 Sorzano (La Rioja) Spain