BAÑERA 2+1

THREE AXLE DUMP TRAILERS WITH SWIVEL PLATE (2+1). STAINLESS STEEL

Highly suitable for wide turns and for on-road driving.

Various types of box:

Dumper Box: Watertight Monoblock, semicircular in shape with slight rounding and lateral folds to add robust strength. These dumpsters are for all kinds of loads  but are recommended for transporting manure, as it is virtually impossible for the manure to stick to the floor of the box when tipped up. The design of this kind of trailer is unique, in order to provide elegance and maximum performance.  

Costillas Box: Watertight, square-shaped monoblockbox with lateral reinforcements.

 

Outstanding for a wide range of differences:

Reinforced structure. An ideal, modern design, an improvement on everything which has gone beforeand top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also achieve maximum width to give better stability when tipping. Incorporating intermediate spars on the front vane of the chassis. Strengthened monoblock forward traction unit, as this is the part which undergoes most strain when pulling.

The watertight monoblock boxes are rounded with folds and upper cold-formed steel structural tube coping (to quality standard S-275-JOH) to give extra strength.

The tipping angle is always greater than 45 degrees. Since there are materials which require it, the rear rotation of the tipping mechanism is designed to achieve great stability when tipping and a greater height when unloading the product carried.

We achieve the maximum stability. Studying how to lower the box as close to the ground as possible.

We also offer the possibility of mounting a lowered chassis so as to lower the height of the box as much as possible.

Each and every one of the components used is highly resistant and of top quality, whether axles, wheels, suspension, telescopic cylinder, etc. To exclude possible breakdowns in use, overloads, heavy work, etc.

Its solidity, aesthetic appearance and excellent finish mark the difference.

3 year warranty.

EQUIPMENT INCLUDED

  1. Reinforced chassismade of structural steel tube quality S-275-J0H with intermediate crossbars.
  2. Double chassis
  1.        Strengthened front traction
  2.        Box with structural tube top finish (or lateral breakwaters when it is for the harvest or liquids) (depending on models)
  3.     Industrial 22mm-ball impeller
  4.     Hooks for chain.
  5.     Spring for adjusting height of the thrower with tensioner
  6.     Front balcony.
  7.     Pivots for tying in the whole perimeter.
  8.     30 litre water tank.
  9.     Tool box.
  10.     Sheet metal mudguards
  11.     Primer and finishing coat composed of two components of maximum adherence and wear
  12.   3 year warranty
  1. Rear turning of the tipper designed to achieve great stability when tipping and a higher unloading height for the product transported.
  2. Single-hull box in different models:
    1. Costillas; SQUARE, with side reinforcement
    2. Dumper; ROUNDED with lateral strengthening folds
  1. Stainless steel box
  2. Telescopic, anti-seizure tipping piston (over sized to prevent overload).
    1. Tipping angle 47 to 49º
  3. Oscillating bumper and protective grille for pilot lamps (electrical installation according to regulations)
  4. Hose and cable from the point of the lance to prevent getting tangled when the tractor turns.
  1. Reinforced lance with
  1. Front axles suspension  with parabolic leaf springs
  2. Tandem industrial suspension with straps

 

To make your customised trailer and other accessories, contact us

 

OPTIONAL EQUIPMENT                                  

  1.        Regulador de altura de lanza con ajuste automático (sustituyendo al muelle tensor)
  2.        Lowered chassis
  3.        With a wide range of tyres for different purposes
  4.        Twinned wheels
  5.        Speed axles
  6.        Self-Steering Axle
  7.        Forced Self-Steering Axle
  8.        Curved shafts
  9.        Rear supports
  10.     3-position, multipurpose hydraulic gate
  11.     Retaining hydraulic gate
  12.     Side gate
  13.     Cereal hatch
  14.     Different types of awning
  15.     On drop sides
  16.     Side windows
  17.     Hydraulic or pneumatic suspensión on axles
  18.     Pneumatic or mixed brakes
  19.     Stainless steel box with or without damask polishing
  20.     Adaptation for harvest (front, rear and side surge breaks, Rear apron. Double floor, outlet for liquids, retaining hatch)
  21.     Rear controls for opening hydraulic tailgate
  22.     Auxiliary motor-pump-tank group
  23.     Damask polishing

 

To make your customised trailer and other accessories, contact us

MODEL

LENGTH INSIDE OF BOX

CAPACITY

(m3/Grape/Wheat)

WHEEL

HF-3EG/24T60

6000x2300x1600

22 / 19.800 / 17.600

385/65R22.5’’ R

HF-3EG /24T65

6500x2300x1600

24 / 19.600 / 19.200

385/65R22.5’’ R

HF-3EG /24T70

7000x2300x1600

26 / 23.400 / 20.800

385/65R22.5’’ R

HF-3EG /24T74

7400x2300x1600

27.2/ 24.480 / 21.760

385/65R22.5’’ R

HF-3EG /24T80

8000x2300x1600

29.5/ 26.550 / 23.600

445/65R22.5’’ N

HF-3EG /24T84

8400x2300x1600

30.9/ 27.800 / 24.720

445/65R22.5’’ N

HF-3EG /24T84+

8400x2300x1800

34.7/ 28.000 / 22.500

445/65R22.5’’ N

HF-3EG /24T94+

9400x2300x1800

38.9/ 35.000 / 31.100

445/65R22.5’’ N

 

For other models, to make a customised trailer or other accessories, please contact us.

HF Trailers · Camino de la Calleja S/N 26191 Sorzano (La Rioja) Spain