Remolques Bañera TRIDEM

SINGLE AXLE DUMP TRAILERS

Highly recommended for mountainous terrain or where there are varying slopes, with a safer tractor for difficult situations. Easy handling when making manoeuvres.

It has a semi-circular shape with a slight rounding and side folds to give it greater rigidity. These troughs are for carrying all kinds of loads but are ideal for transporting manure, as it is virtually impossible for the manure to stick to the floor of the box when it is tipping. The design of this type of trailer is unique, so as to ensure maximum performance and elegance.

The single axle troughs are designed so that the box sits as low as possible for achieving maximum capacity, optimum stability and a low load height so that the grapes can be easily unloaded without using a ladder, designed for those growers who harvest by hand, and also useful for collecting olives, almonds, cereals, etc.

Outstanding for a wide range of differences:

Reinforced structure. An ideal, modern design, an improvement on everything which has gone beforeand top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also achieve maximum width to give better stability when tipping.

The watertight monoblock boxes are rounded with folds and upper cold-formed steel structural tube coping (to quality standard S-275-JOH) to give extra strength.

The tipping angle is always greater than 45 degrees. Since there are materials which require it, the rear rotation of the tipping mechanism is designed to achieve great stability when tipping and a greater height when unloading the product carried.

 

We achieve the maximum stability. Studying how to lower the box as close to the ground as possible.

Each and every one of the components used is highly resistant and of top quality, whether axles, wheels, suspension, telescopic cylinder, etc. To exclude possible breakdowns in use, overloads, heavy work, etc.

Its solidity, aesthetic appearance and excellent finish mark the difference.

3 year warranty.

  1. Reinforced chassismade of structural steel tube quality S-275-J0H with intermediate crossbars.
  2. Rear turning of the tipper designed to achieve great stability when tipping and a higher unloading height for the product transported.
  3. Single-hull box in different models:
    1. Costillas; SQUARE, with side reinforcement
    2. Dumper; ROUNDED with lateral strengthening folds
    3. Eco; SQUARE with lateral strengthening folds
  1. Box with structural tube top finish (or lateral breakwaters when it is for the harvest or liquids) (depending on models)
  2.     Primer and finishing coat composed of two components of maximum adherence and wear
  3. 3 year warranty
  1. Watertight automatic-opening gate with rubber seal
  2. 2 or 4 automatic closing claws and 3 or 5 butterfly nut safety locks.
  3. Hydraulic brake (one piston per wheel) with possibility of adapting for tractor brake pedal
  4. Mechanical hand brake.
  5. Telescopic, anti-seizure tipping piston (over sized to prevent overload).
    1. Tipping angle 47 to 49º
  6. Oscillating bumper and protective grille for pilot lamps (electrical installation according to regulations)
  7. Hose and cable from the point of the lance to prevent getting tangled when the tractor turns.
  8. Hooks for chains
  9. Reinforced lance
  10. Mechanical support withscaler (hydraulic dumbwaiterwith manual pump from HF-TA-18T55)
  11. Front ladder.
  12. Pivots for tying in the whole perimeter.
  13. 30 litre water tank.
  14. Tool box.
  15. Sheet metal mudguards

To make your customised trailer and other accessories, contact us

 

 

 

 

 

OPTIONAL EQUIPMENT

                                   

  1. Different types of coupling up
  2. Traction system
  3. With a wide range of tyres for different purposes.
  4. Stainless steel box
  5. Twinned wheels
  6. Speed axles
  7. Curved shaft
  8. Rear supports
  9.  Front balcony (included with the side awning)
  10. 3-position, multipurpose hydraulic gate
  11. Retaining hydraulic gate
  12. Side gate
  13. Cereal hatch
  14. Worm
  15. Different types of awning
  16. On drop sides
  17. Side windows
  18. Different types of suspension on the lance (leaf-sprung, hydraulic, pneumatic)
  19. Leaf-sprung, hydraulic or pneumatic suspension on axles
  20. Pneumatic or mixed brakes
  21. Adaptation for harvest (front, rear and side surge breaks. Rear apron. Double floor, outlet for liquids, retaining hatch)
  22. Hydraulic dumb waiter
  23. Rear controls for opening hydraulic tailgate
  24. Auxiliary motor-pump- tank group
  25. Food-safe paint (epoxy)

 

To make your customised trailer and other accessories, contact us

 

 

MODEL

LENGTH INSIDE OF BOX

CAPACITY

(m3/Grape/Wheat)

WHEEL

HF-1E-4TS

2600X1650X670

2,9 / 2.320 / 2.600

10.0/75-15.3

HF-1E-5TS

2900X1650X670

3,2 / 2.560 / 3.000

10.0/75-15.3

HF-1E-6TS

3200X1800X750

4,3 / 3.440 / 4.000

10.0/75-15.3

HF-1E-BA36

3500X1800X850

5,4 / 4.300 / 5.000

11.5/80-15.3’’

HF-1E-8TSL

3700X1900X1000

7 / 5.600 / 6.300

11.5/80-15.3’’

HF-1E-8TS

3700X2000X1250

9,25 / 7.400 / 8.300

285/70R19.5’’

HF-1E-10TS

4000X2000X1250

10 / 8000 / 9.000

385/65R22.5’’

HF-1E-10TS+

4000X2100X1300

11/ 8.800 / 10.000

385/65R22.5’’

HF-1E-10TS-F

4500X2100X1300

12 / 10.000 / 11.000

385/65R22.5’’

For other models, to make a customised trailer or other accessories, please contact us.

HF Trailers · Camino de la Calleja S/N 26191 Sorzano (La Rioja) Spain