Spreads over a semicircle of up to 15 metres depending on the material. For open fields.

Watertight monoblock “V” shaped box with central reinforcement. We achieve the greatest possible stability since we lower the point of gravity to the maximum so that the box sits between the wheels and at the same time the overall height is as low as possible, offering excellent performance when loading with the raw material. Our box design combines maximum load capacity with the total sliding of adherent loads on the drag chains. The design of this box means that the drag kit and the spreader unit need to make less effort. 

Lance with a hydraulic rotation system to facilitate entering and exiting rows when space is limited. The highest rotation capacity in its class.

We can make the hydraulic hatch remain in a horizontal position when open, to avoid exceeding the trailer’s total height.

HF spreaders stand out for their many differences:

Incorporating a patented system which tensions and at the same time automatically protects the hauling system, only HF trailers can offer you this,in which we offer a 5 year warranty on the hauling system. In this way not only is the trailer’s mechanical system protected, but also your investment.

Reinforced structure. An ideal, modern design, an improvement on everything which has gone beforeand top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also can achieve the maximum width.

Watertight Monoblock box with reinforced sides and cold-formed steel, structural tube top finish (with quality S-275-JOH) which gives great resistance.

The binding of the box with the chassis has several supports so as to achieve perfect consistency, able to resist possible toppling over.

We achieve the maximum stability. Studying how to lower the box as close to the ground as possible.

The bars of the conveyor belt are made of cold-formed steel structural tube (to quality standard S-275-JOH), which is cleaner, more resistant and elastic than hot-rolled profiles (for example U-type)

Our hydraulic door with its respective guides is especially strong.

Each and every one of the components used is very resistant and of high quality, whether axles, wheels, suspension, telescopic piston, etc. To prevent possible breakdowns during use, overloading, heavy work, etc.

It is also very important that the reducer and motor which moves the set of chains and bar responsible for moving loads such as manure, grain, etc., are of high quality and maximum resistance.

These scattering columns or vertical vanes are specially designed to achieve the maximum width and highest even spreading quality, performing a single task for any type of manure, whether hen, chicken, cow, sheep, horse, etc.

We can also mount different levels of chain resistance depending on the use it is going to be put to.

Since these machines are exposed to a high level of corrosion, we are able to manufacture the inside of the box and tailgate in stainless steel guaranteeing freedom from corrosion for its full working life.

Our paints are of special high adherence to prevent corrosion caused by manure

Very versatile as it can be used to transport and then unload grain or fodder. With detachable spikes you can obtain high capacity.

All our products have an excellent finish and undergo a stringent quality check to ensure they work perfectly and are strong, safe, guaranteed machines.

3 year warranty.

EQUIPMENT INCLUDED:

1.        Reinforced structural steel tube chassis to quality S-275-J0H.
2.        Closed, rectangular structural tube pulling bars.
3.        “V” shaped box with progressive fall of the sides to stop manure accumulation
4.        Stainless steel box
5.        Hydraulic action (with dual effect motor) of the dragging chains with 3 lane flow control.
6.        Mechanical support withscaler (hydraulic dumbwaiterwith manual pump from HF-TA-18T55)
7.        Reinforced lance
8.        Reinforced lance with multi-leaf sprung suspension (pump from HF-1E-1E55RG (2MG-2000)
9.        Folding ladder for external access and inside steps.
10.     Folding lamp housing and number plate. (electrical installation according to regulations)
11.     Primer and finishing coat composed of two components of maximum adherence and wear
12.     Hydraulic brake on 2 wheels with two pistons and installation for tractor brake pedal.
13.     Mechanical hand brake.
14.     Support for running the hoses to the tractor avoiding snagging when manoeuvring.
15.     Fused power point to protect trailer mechanics.
16.     Hooks for chain.
17.     Big tractor wheel  (pump from HF-1E-9EM32 (2MG-2000) and following)
18.     Front visor
19.     Manual tensioners via rods with screw threads. (Patented system dependig on model)
20.     2 giant spreader pinwheels
21.     Pinwheel blades can be changed
22.     Top cover in 140X80 structural tube.
23.     Prepared for the transport cereals
24.     3 year warranty
25.     PATENTED system to prevent breakdowns and reduce maintenance. 5-year warranty (depending on model)

To make your customised trailer and other accessories, contact us

OPTIONAL EQUIPMENT

6.     Different types of coupling up
7.     Tipper box
8.     Traction system
9.     Widen the axle shaft for greater stability
10.     A wide range of tyres for different purposes. (Flotation, on-road)
11.     Twinned wheels
12.     Speed axles
13.     Curved shafts
14.     Hydraulic dropdown “guillotine” gate
15.     Hydraulic gate which does not protrude above the trailer when it is open
16.     Different types of awning
17.     On drop sides
18.     On drop sides for silage
19.     Front mirror
20.     Electric remote control
21.     Homokinetic transmission
22.     Tailgate opening indicator
23.     Revolving
24.     Electric belt-speed regulator
25.     Prepared for the transport cereals
26.     Different types of product locaters
27.     Rear conveyor belt for unloading the product
28.     Different types of suspension on the lance (leaf-sprung, hydraulic, pneumatic)
29.     Leaf-sprung, hydraulic or pneumatic suspension on axles
30.     Pneumatic or mixed brakes
31.     Hydraulic rotation in the lance
32.     Support mechanical dumbwaiter with scaler
33.     Auxiliary motor-pump- tank group
34.     Homokinetic power point
35.     PATENTED system to prevent breakdowns and reduce maintenance. 5-year warranty (depending on model)

To make your customised trailer and other accessories, contact us

For other models, to make a customised trailer or other accessories, please contact us.