MANURE SPREADERS TRAILERS FOR MONTAIN. STAINLESS STEEL

MANURE SPREADERS TRAILERS FOR MONTAIN. STAINLESS STEEL

These open-field spreaders for mountainous or difficult terrain offer various options which can be hooked up to a traction system. Another good option is to have a tipping box so that when descending slopes in estates, mountains or meadows, the box can be raised to a horizontal position to ensure continuous, even spreading. And the possibility of widening the axle tread to achieve greater stability, fitting different tyres.  

Spreads over a semicircle of up to 15 metres depending on the material.

Lance with a hydraulic rotation system to facilitate entering and exiting rows when space is limited. The highest rotation capacity in its class.

We can make the hydraulic hatch remain in a horizontal position when open, to avoid exceeding the trailer’s total height.

Various types of box:

Watertight monoblock “V” shaped box with central reinforcement. We achieve the greatest possible stability since we lower the point of gravity to the maximum so that the box sits between the wheels and at the same time the overall height is as low as possible, offering excellent performance when loading with the raw material. Our box design combines maximum load capacity with the total sliding of adherent loads on the drag chains. The design of this box means that the drag kit and the spreader unit need to make less effort. 

Watertight, square-shaped monoblockbox with lateral reinforcements. More load capacity when there is no restriction on the overall height.

HF spreaders stand out for their many differences:

Incorporating a patented system which tensions and at the same time automatically protects the hauling system, only HF trailers can offer you this,in which we offer a 5 year warranty on the hauling system. In this way not only is the trailer’s mechanical system protected, but also your investment.

Reinforced structure. An ideal, modern design, an improvement on everything which has gone beforeand top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also can achieve the maximum width.

Watertight Monoblock box with reinforced sides and cold-formed steel, structural tube top finish (with quality S-275-JOH) which gives great resistance.

The binding of the box with the chassis has several supports so as to achieve perfect consistency, able to resist possible toppling over.

We achieve the maximum stability. Studying how to lower the box as close to the ground as possible.

The bars of the conveyor belt are made of cold-formed steel structural tube (to quality standard S-275-JOH), which is cleaner, more resistant and elastic than hot-rolled profiles (for example U-type)

Our hydraulic door with its respective guides is especially strong.

Each and every one of the components used is very resistant and of high quality, whether axles, wheels, suspension, telescopic piston, etc. To prevent possible breakdowns during use, overloading, heavy work, etc.

It is also very important that the reducer and motor which moves the set of chains and bar responsible for moving loads such as manure, grain, etc., are of high quality and maximum resistance.

These scattering columns or vertical vanes are specially designed to achieve the maximum width and highest even spreading quality, performing a single task for any type of manure, whether hen, chicken, cow, sheep, horse, etc.

We can also mount different levels of chain resistance depending on the use it is going to be put to.

Since these machines are exposed to a high level of corrosion, we are able to manufacture the inside of the box and tailgate in stainless steel guaranteeing freedom from corrosion for its full working life.

Our paints are of special high adherence to prevent corrosion caused by manure

Very versatile as it can be used to transport and then unload grain or fodder. With detachable spikes you can obtain high capacity.

All our products have an excellent finish and undergo a stringent quality check to ensure they work perfectly and are strong, safe, guaranteed machines.

3 year warranty.

EQUIPMENT INCLUDED:

 

  1. Reinforced structural steel tube chassis to quality S-275-J0H.
  2. Closed, rectangular structural tube pulling bars.
  3. Watertight, square-shaped monoblock box with lateral reinforcements, Or alternatively, a “V” shaped box with progressive fall of the sides to stop manure accumulation (From  HF-1E-6EM33 (2MG 1800)
  4. Stainless steel box
  5. Folding ladder for external access and inside steps. (From  HF-1E-6EM33(2MG-1800) and following)
  6.   Hooks for chain.
  7.   Front visor (depending on models)
  8.   Big tractor wheel  (pump from HF-1E-9EM32 (2MG-2000) and following)
  9.   Manual tensioners via rods with screw threads. (Patented system dependig on model)
  10.   2 giant spreader pinwheels (On HF-1E-6EM33(2MG-1800) and following)
  11.   Pinwheel blades can be changed (On HF-1E-6EM33(2MG-1800) and following)
  12.   Top cover in 140X80 structural tube. (pump from HF-1E-9EM32 (2MG-2000))
  13.   PATENTED system to prevent breakdowns and reduce maintenance. 5-year warranty (depending on model)
  14. Hydraulic action (with dual effect motor) of the dragging chains with 3 lane flow control.
  15. Mechanical support withscaler (hydraulic dumbwaiterwith manual pump from HF-TA-18T55)
  16. Reinforced lance
  17. Reinforced lance with multi-leaf sprung suspension (pump fromHF-1E-1E55RG (2MG-2000)
  18. Folding lamp housing and number plate.(electrical installation according to regulations)
  19. Primer and finishing coat composed of two components of maximum adherence and wear
  20. Hydraulic brake on 2 wheels with two pistons and installation for tractor brake pedal.
  21. Mechanical hand brake.
  22. Support for running the hoses to the tractor avoiding snagging when manoeuvring.
  23. Fused power point to protect trailer mechanics.
  24. Sheet metal mudguards. (on models in which the box is not “V” shaped)
  25. 2 or 4 scattering vanes
  26. Prepared for the transport cereals
  27. 3 year warranty

 

 

To make your customised trailer and other accessories, contact us

 

OPTIONAL EQUIPMENT

  1. Different types of coupling up
  2. Tipper box
  3. Traction system
  4. Widen the axle shaft for greater stability
  5. Big tractor wheel
  6. Twinned wheels
  7. Speed axles
  8. Curved shafts
  9. Leaf-sprung, hydraulic or pneumatic suspension on axles
  10. Pneumatic or mixed brakes
  11. Hydraulic rotation in the lance
  12. Different types of box unit; square with ribs “Costillas”, square without ribs “Eco”, and “V”
  13. Support mechanical dumbwaiter with scaler
  14. Auxiliary motor-pump- tank group
  15. PATENTED system to prevent breakdowns and reduce maintenance. 5-year warranty (depending on model)
  16. A wide range of tyres for different purposes. (Flotation, on-road)
  17. Hydraulic dropdown “guillotine” gate
  18. Hydraulic gate which does not protrude above the trailer when it is open
  19. Different types of awning
  20. On drop sides
  21. On drop sides for silage
  22. Front mirror
  23. Electric remote control
  24. Homokinetic transmission
  25. Tailgate opening indicator
  26. Revolving
  27. Electric belt-speed regulator
  28. Prepared for the transport cereals
  29. Different types of product locaters
  30. Rear conveyor belt for unloading the product
  31. Different types of suspension on the lance (leaf-sprung, hydraulic, pneumatic)
  32. Homokinetic power point

 

To make your customised trailer and other accessories, contact us

 

MODEL

WHEEL

CAPACITY

PINWHEELS

BOX MEASUREMENTS             (length X width X height)

HF-1E-4EM29(2M-1200)

11,5/80-15.3

4

2 vertical

3500 X 1200 X 920

HF-1E-5EM32(2M-1200)

11,5/80-15.3

4,3

2 vertical

3800 X 1200 X 920

HF-1E-6EM37(2M-1200)

11,5/80-15.3

4,8

2 vertical

4300 X 1200 X 920

HF-1E-5EM28(2M-1500)

11,5/80-15.3

5,2

2 vertical

3500 X 1500 X 1070

HF-1E-6EM31(2M-1500)

11,5/80-15.3

5,7

2 vertical

3800 X 1500 X 1070

HF-1E-6EM33(2M-1500)

11,5/80-15.3

6,5

2 vertical

4000 X 1500 X 1070

HF-1E-6EM36(2M-1500)

11,5/80-15.3

6,9

2 vertical

4300 X 1500 X 1070

 

HF-1E-5EM30(4M-1600)

11,5/80-15.3

6

4 vertical

3500 X 1600 X 1070

HF-1E-6EM33(4M-1600)

11,5/80-15.3

6,5

4 vertical

3800 X 1600 X 1070

HF-1E-9EM35(4M-1600)

300/80-15.3

6,7

4 vertical

4000  X 1600 X 1070

HF-1E-9EM38(4M-1600)

300/80-15.3

7,8

4 vertical

4300 X 1600 X 1070

HF-1E-6EM31(4M-1800)

11,5/80-15.3’’

6,9

4 vertical

3500 X 1800 X 1070

HF-1E-6EM34(4M-1800)

11,5/80-15.3’’

7,4

4 vertical

3800 X 1800 X 1070

HF-1E-9EM36(4M-1800)

385/65R22,5’’ R

8,3

4 vertical

4000 X 1800 X 1070

HF-1E-9EM39(4M-1800)

385/65R22,5’’ R

9

4 vertical

4300 X 1800 X 1070

HF-1E-9EM44(4M-1800)

385/65R22,5’’ R

10

4 vertical

4800 X 1800 X 1070

 

HF-1E-6EM33(2MG-1800)

385/65R22,5’’ R

7

2 vertical GIGANTS

4300 X 1800 X 1120

HF-1E-9EM38(2MG-1800)

385/65R22,5’’ R

8,4

2 vertical GIGANTS

4800 X 1800 X 1120

HF-1E-9EM43(2MG-1800)

385/65R22,5’’ R

9,3

2 vertical GIGANTS

5300 X 1800 X 1120

 

 

 

 

 

HF-1E-9EM32(2MG-2000)

15.5/80-24’’

9

2 vertical GIGANTS

4300 X 2160 X 1400

HF-1E-9EM37(2MG-2000)

15.5/80-24’’

10,5

2 vertical GIGANTS

4800 X 2160 X 1400

HF-1E-9EM43(2MG-2000)

16.5/85-28’’

12,4

2 vertical GIGANTS

5400 X 2160 X 1400

HF-1E-9EM48(2MG-2000)

18.4-34”

13,4

2 vertical GIGANTS

5900 X 2160 X 1400

HF-1E-9EM50(2MG-2000)

18.4-34”

14

2 vertical GIGANTS

6100 X 2160 X 1400

HF-1E-10E55RG (2MG-2000)

18,4R38’’

16,25

2 vertical GIGANTS

6700 X 2200 X 1400

HF-1E-10E60RG (2MG-2000)

18,4R38’’

18

2 vertical GIGANTS

7200 X 2200 X 1400

 

For other models, to make a customised trailer or other accessories, please contact us.

HF Trailers · Camino de la Calleja S/N 26191 Sorzano (La Rioja) Spain