CARRO GANADERO

THREE AXLE PLATFORMS TRAILERS WITH PLATE (2+1)

Designed to adapt to different loads, whether for transporting bales, pallets, crates of fruit, drawers, filter carriers, etc. It is designed to achieve the smallest possible turning circle. Highly recommended for on-road driving. 

Outstanding for a wide range of differences:

Reinforced structure. An ideal, modern design, an improvement on everything which has gone before and top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also achieve maximum width to give better stability when tipping. Incorporating intermediate spars on the front vane of the chassis. Strengthened monoblock forward traction unit, as this is the part which undergoes most strain when pulling.

We achieve the maximum stability.

Each and every one of the components used is highly resistant and of top quality, whether axles, wheels, suspension, telescopic cylinder, etc. To exclude possible breakdowns in use, overloads, heavy work, etc.

Its solidity, aesthetic appearance and excellent finish mark the difference.

3 year warranty.

EQUIPMENT INCLUDED

  1. Reinforced chassis made of structural steel tube quality S-275-J0H with intermediate crossbars.
  2. Double chassis (depending on model)
  1.        Strengthened front traction
  2.        Suspension on front axle with parabolic leaf springs 
  3.        Industrial 22mm-ball impeller
  4.        Spring for adjusting height of the thrower with tensioner
  5.     Hooks for chain.
  6.     Designed to achieve minimum possible turning circle
  7.     Primer and finishing coat composed of two components of maximum adherence and wear
  8.     3 year warranty  
  1. Industrial leaf-sprung tandem
  1. Carbon-steel plate bed with lower folds
    1. Sides to the customer’s taste (in folded metal plate or structural tube)
    2. Drop down or detachable front leading end with integrated ladder
  2. Hydraulic brake (one piston per wheel) with possibility of adapting for tractor brake pedal
  3. Mechanical hand brake.
  4. Oscillating bumper and protective grille for pilot lamps(electrical installation according to regulations)
  5. Hose and cable from the point of the lance to prevent getting tangled when the tractor turns.
  1. Reinforced lance with multi-leaf sprung suspension.
  1. 30 litre water tank.
  2. Tool box.

To make your customised trailer and other accessories, contact us

 

OPTIONAL EQUIPMENT                                                                   

  1.        Adjustment of the height of the thrower with automatic setting (instead of tensioning spring)
  2.        With a wide range of tyres for different purposes.
  3.        Twinned wheels
  4.        Speed axles
  5.        Self-Steering Axle
  6.        Curved shafts
  7.        Hydraulic or pneumatic suspension on axles
  8.        Pneumatic or mixed brakes
  9.        Front and back leading end
  10.     Manual ramps, transport of machinery
  11.     Hydraulic ramps, transport of machinery
  12.     Rear controls for hydraulic ramp

 

To make your customised trailer and other accessories, contact us

MODEL

LENGTH OF BED (mm.)

WHEEL

HF-3EG/23P85

8500

285/70R19.5”

HF-3EG/23P90

9000

285/70R19.5”

HF-3EG/23P95

9500

285/70R19.5”

HF-3EG/23P100

10000

285/70R19.5”

HF-3EG/23P105

10500

285/70R19.5”

For other models, to make a customised trailer or other accessories, please contact us.

HF Trailers · Camino de la Calleja S/N 26191 Sorzano (La Rioja) Spain