DUAL AXLE PLATFORMS TRAILERS SEPARATED WITH SWIVEL PLATE

DUAL AXLE PLATFORMS TRAILERS SEPARATED WITH SWIVEL PLATE

Designed to adapt to different loads, whether for transporting bales, pallets, crates of fruit, drawers, filter carriers, etc. It is designed to achieve the smallest possible turning circle. Highly recommended for on-road driving. 

Outstanding for a wide range of differences:

Reinforced structure. An ideal, modern design, an improvement on everything which has gone before and top quality materials.

Our exclusive chassis design consists of cold-formed steel structural tubes (to quality standard S-275-JOH) providing a high degree of elasticity and with a much higher estimation of load capacity to that which it can transport. We also achieve maximum width to give better stability when tipping. Incorporating intermediate spars on the front vane of the chassis. Strengthened monoblock forward traction unit, as this is the part which undergoes most strain when pulling.

We achieve the maximum stability.

Each and every one of the components used is highly resistant and of top quality, whether axles, wheels, suspension, telescopic cylinder, etc. To exclude possible breakdowns in use, overloads, heavy work, etc.

Its solidity, aesthetic appearance and excellent finish mark the difference.

3 year warranty.

EQUIPMENT INCLUDED

  1.        Reinforced chassis made of structural steel tube quality S-275-J0H with intermediate crossbars.
  2.        Double chassis (depending on model)
  3.        Strengthened front traction
  4.        Industrial leaf-sprung tandem
  5.        Suspension on front axle with parabolic leaf springs 
  6.        Industrial ball impeller (16, 20 and 22 mm diameter depending on model)
  7.        Spring for adjusting height of the thrower with tensioner
  8.        Carbon-steel plate bed with lower folds
  9.        Sides to the customer’s taste (in folded metal plate or structural tube)
  10.        Drop down or detachable front leading end with integrated ladder
  11.        Hydraulic brake (one piston per wheel) with possibility of adapting for tractor brake pedal
  12.     Mechanical hand brake.
  13.     Oscillating bumper and protective grille for pilot lamps (electrical installation according to regulations)
  14.     Hose and cable from the point of the lance to prevent getting tangled when the tractor turns.
  15.     Hooks for chain.
  16.     Reinforced lance with multi-leaf sprung suspension
  17.     Designed to achieve minimum possible turning circle
  18.     30 litre water tank.
  19.     Tool box.
  20.     Primer and finishing coat composed of two components of maximum adherence and wear
  21.     3 year warranty  

To make your customised trailer and other accessories, contact us

 

OPTIONAL EQUIPMENT                                                                   

  1.        Adjustment of the height of the thrower with automatic setting (instead of tensioning spring)
  2.        With a wide range of tyres for different purposes.
  3.        Twinned wheels
  4.        Speed axles
  5.        Curved shafts
  6.        Hydraulic or pneumatic suspension on axles
  7.        Pneumatic or mixed brakes
  8.        Front and back leading end
  9.        Manual ramps, transport of machinery
  10.     Hydraulic ramps, transport of machinery
  11.     Rear controls for hydraulic ramp

 

To make your customised trailer and other accessories, contact us

MODEL

LENGTH OF BED (mm.)

WHEEL

HF-2E/15P50

5000

285/70R19.5”

HF-2E/15P55

5500

285/70R19.5”

HF-2E/15P60

6000

285/70R19.5”

HF-2E/15P65

6500

285/70R19.5”

HF-2E/15P70

7000

285/70R19.5”

HF-2E/15P75

7500

285/70R19.5”

HF-2E/15P80

8000

285/70R19.5”

HF-2E/15P85

8500

285/70R19.5”

HF-2E/15P90

9000

285/70R19.5”

For other models, to make a customised trailer or other accessories, please contact us.

HF Trailers · Camino de la Calleja S/N 26191 Sorzano (La Rioja) Spain